Home
ATLAS 60MOD
Coming soon
ATLAS 60 MOD
ATLAS 60 MOD
ATLAS 60 MOD
ATLAS 60 MOD
ATLAS 60 MOD
ATLAS 60 MOD
ATLAS 60 MOD
ATLAS 60 MOD
ATLAS 60 MOD
ATLAS 60 MOD
ATLAS 60MOD
Coming soon
Brand new architecture — Separation of LEDs and keys
At the physical level, RGB LED signal and heat interference are isolated, allowing the main keyboard PCB to focus on efficiently handling key functions.
ATLAS 60 MOD
Faster than fast Response speed (latency) is the top priority —

ATLAS 60 MOD adopts the same underlying solution as the EDGE 80,
and through further extreme optimization of hardware and software, its performance reaches new heights.
Measured end-to-end latency 0.14ms
Brighter than bright Thanks to the new architecture,
ATLAS 60 MOD can fully unleash the brightness of RGB LEDs.
Compared with EDGE 80, LED brightness is increased by 30%, with peak brightness boosted up to 50%.

As always, brightness has no impact on performance.
Brightness improvement 30%
Customization is not a gimmick, it’s our attitude We have thoroughly considered the habits and needs of different users, as well as the limitations of compact keyboards.
ATLAS 60 MOD offers a wide range of layout options, striving to make ATLAS 60 MOD suitable for more people.
Whether you’re a beginner or an expert, you’ll get exactly what you want.

Support for split spacebar — even more convenient than a 100% layout keyboard

ATLAS 60 MOD supports a split spacebar.
With a split spacebar, even on a 60% layout, you can fully — and even more quickly — use arrow keys, function keys, and more.

Taking arrow keys as an example:

Independent arrow keys

You need to move your right hand a considerable distance to use the arrow keys.

With split spacebar

When you need to use the arrow keys, simply hold the right spacebar (Fn) and press IJKL to input the arrow keys. You don’t need to move your right hand at all.

* Key mapping is fully customizable, you can use whatever combination you want.

Similarly, you can also use the split spacebar to quickly access other function keys (by default, Right Space + YHNM corresponds to PageUp, PageDown, Home, and End).

* The split spacebar is optional — you can still choose to use a standard spacebar.

Almost all layout options

ATLAS 60 MOD supports nearly all 60% layout variations.
All options are integrated into a single PCB.
ATLAS 60 MOD123456
  1. Standard Backspace / Split Backspace
  2. Standard Caps / Stepped Caps
  3. ANSI Enter / ISO 回车
  4. Standard left Shift / Split left Shift
  5. Standard right Shift / Split right Shift
  6. 6.25U space /
    7U right /
    2.25U 1.25U 2.75U split space /
    3U 1U 3U split space
* Plate for plate-mount stabilizer (pre-installed) does not support options 1, 2, 3, 4, 5.* The plate for plate-mount stabilizers comes in 4 versions based on option 6. Only the selected version is included. The main PCB and LED PCB support all layouts; changing to a layout unsupported by the included plate requires a matching plate purchased separately.* Plate for PCB-mount stabilizer support all layout options. If you want to use it, you need to supply a compatible PCB-mount stabilizer plate and PCB-mount stabilizers yourself.* To achieve layout compatibility on a single PCB and avoid issues that may arise from a 90° rotation, the Capslock key, 625U spacebar, and 125U spacebar need to have "cut pins". Therefore, regardless of whether you purchase the version with switches or not, 4 switches with cut legs are included.

Wide case compatibility

ATLAS 60 MOD
GH60 USB Type-C daughterboard
Use this board when installing into standard GH60 cases.
Unified Daughterboard C Series compatible daughterboard
Use this board when installing into cases with UDB-C support.
We placed the USB Type-C port on a detachable daughterboard.
This makes it possible to be compatible with more types of cases1:
  • Standard GH60 cases
  • Cases using a Unified Daughterboard
  • Cases with O-Ring mounting
1Different cases may have additional requirements for PCB shape or height, and we cannot guarantee compatibility with every case in the world. We will make available the design files for the plate layout, PCB layout, and LED backplate PCB layout, so that you and case designers can verify compatibility and use them as a reference.
Mobius Switches Wuque Studio deeply customized the RAKKA technical solution.
ATLAS 60 MOD
Customized modified POM material
Exclusively tailored magnetic flux
Specialized octagonal structure
Fan-shaped high-transparency PC-material light guide pillar
Large coil spring
Customized modified PA66 material
StyleLinearTotal travel3.5mmInitial force35±5gfBottoming force50±7gfMaterialStem: Modified POM Housing: Modified PA66LubeFactory pre-lubed
  1. Unique structure
    Inheriting the WS Flux Switch design, the octagonal stem is paired with four-point rebound stops and bottom housing slots, delivering a full-travel straight up-and-down motion with maximum bottom-out stability.
  2. Exclusively customized adaptation
    Magnetic flux customized for RAKKA’s Hall sensors fully unleashes sensor sensitivity, greatly improving bottom-out response speed.
    The magnetic flux of the Mobius switch is not the same as that of retail WS Flux Switch.
  3. Esports-grade fast rebound
    With a large-diameter spring, rebound is faster and more responsive, achieving near-zero perceptible control latency.
  4. Smooth and consistent quality control
    Optimized by the Wuque Studio, with high-precision machining + fully automated lubrication + premium structure, delivering smooth sound and feel with excellent switch consistency.
  5. High-brightness light guide design
    Unconventional fan-shaped high-transparency PC light guide pillar integrates light guiding and focusing, offering higher brightness than flat-cut designs.
  6. Customized premium materials
    The bottom housing uses Wuque Studio’s exclusive modified PA66 (tested six times) fine-tuned for RAKKA, providing a crisp feel and clean sound. Paired with a POM stem, it redefines the stereotype of magnetic switches.
Most components are pre-assembled, making customization accessible to everyone To lower the DIY threshold, the core assembly is pre-built at the factory. You only need to install keycaps and a case (both required separately) — no other steps12.
1 The barebones version requires you to install switches (required separately) and stabilizers.
2 If you wish to use PCB-mounted stabilizers (for example, when installing non-standard layouts; a compatible PCB stabilizer plate must be supplied separately), you will need to disassemble and reinstall them yourself.
ATLAS 60 MOD
LED backplate foam
Sandwich foam
LED backplate PCB
PCB
Mobius switch
Plate for plate-mount stabilizers
Removable USB Type-C daughterboard
Not all accessories are shown in the picture

Package Contents

  • 1× PCB
  • 1× LED backplate PCB
    Pre-installed
  • 1× Plate for plate-mount stabilizers
    Divided into 4 versions depending on layout options1, only the selected version is included at the time of purchase.
    Pre-installed
  • 1× Plate-mount stabilizers kit
    6× 200U、1× 625U、1× 700U、2× 300U steel wire
  • 1× Mobius switch Kit
    Included only in the switch-included version, with quantities varying slightly depending on the layout.
    Pre-installed
  • 1× Sandwich foam
    Silencing foam installed between the plate and PCB
    Pre-installed2
  • 1× backplate foam
    Silencing foam installed between PCB and LED backplate PCB
    Pre-installed
  • 1× USB Type-C daughterboard
    Pre-installed
  • 1× Unified Daughterboard C Series (shape compatible) daughterboard kit
    Optional
  • 1× USB Type-C to USB Type-A cable
  • 1× Keycap puller and screwdriver 2-in-1 tool
  • 1× Switch puller
  • 4× Mobius switch with "pin cutted"3
  • 8× Spare screws
1To accommodate different layouts (6.25U spacebar; 7U spacebar; 2.25 1.25 2.75 split space; 3 1 3 split space), the plate for plate-mount stabilizers comes in 4 versions. The included version depends on your purchase selection. Changing layouts later requires you to supply the corresponding plate.
2The foam for the spacebar area comes in 4 types — one is pre-installed, and the other three are included as extras.
3For use with CapsLock/stepped CapsLock, 6.25U spacebar/1.25U spacebar.